catalogue 3 1 0 explosionprotectedpro ducts

EX-SIGNAL AND EMERGENCY LIGHT FITTING
dKLK 88110
Plastic version for Zone 1
These light fittings are in accordance
to the European Norm EN 50014ff for
the temperature class T6. It is therefore
certified for use in the Zones 1 and 2.
Additionally they fulfill the directive EN
60598, Part 2.22 for Emergency Lighting
accordingly.
The Ex-light fitting dKLK 88 has an electronic
ballast and is fitted with a 10 W compact
fluorescent lamp.
The housing is made of a fibre-glass reinforced
polyester and the protective cover
of a transparent or coloured polycarbonate.
When fitted with coloured protective covers
they are used as signal light fittings but also
as safety and emergency light fittings in
conjunction with the exit cubes.
With the CG-S-Monitoring module with
coding switch (for max. 12 light fittings)
which assigns an address to each light
fitting, they can be connected as singularly
monitored emergency light fittings to the
CEAG emergency lighting supply system
(dKLK88110 CG).
Signal light fitting, even with exit cube in
temperature class T6 environments
With compact fluorescent lamp and EVG
Large EEx-e terminal compartment for
ceiling and wall mounting
Safety Standard IP 65
With possible connection to the
CEAG emergency lighting supply
systems
3.10
Polar curve
dKLK 88110
90
60
25
50
75
30
100
125
30
C 0
0
C90 l/cd/klm
Rated luminous flux of lamps: 600 lm
Light fitting efficiency in operation: 75 %
Luminous flux ratio in DC-operation: 75 %
60
90