catalogue 3 1 0 explosionprotectedpro ducts

Recommendations

Info

E X - P E N D A N T L I G H T F I T T I N G NVMV CHAMP for high pressure discharge lamps of up to 150 W Metal version for Zone 2 according to EN 50021 Description The explosion-protected light fittings of the NVMV CHAMP series are in accordance to the ATEX-Directive 94/9/EG. They have been built and tested according to the European Norm EN 50021 and the Australian Norm for Gas-Ex-Areas of Zone 2 classification as well as to the EN 50281-1-1 for use in Dust-Ex-Areas of Zone 22. The light fittings series NVMV CHAMP with the small housing is designed for lamps with a rating of 70 W up to 150 W. The transparent part consists of a temperature stable, impact resistant glass globe that refracts the light and which is protected with a safetyguard. The modular architecture allows for a quick and cost-effective installation of the light fittings. For pole mounting, a thread of 11 /4” BSP is integrated in the light fitting. Apart from ceiling mounting, there are versions available for mast mounting (25° angle) and wall mounting. A particularly durable sealing system for use under extreme climatic conditions brings additional reliability. The restricted breathing version allows a high illumination combined with a high temperature classification. Ideal for installation at low or medium heights, for wall, ceiling or mast mounting Compact and light-weight Safety Standard IP 66/67 High corrosion resistance Restricted breathing version for temperature classes up to T4 Environmental temperatures up to +55 °C 4.28 Polar 120 curve NVMV CHAMP 120 (without external reflector) 90 60 20 40 60 30 80 100 30 C 0 0 C90 l/cd/klm Polar 120 curve 120 NVMV CHAMP (with external reflector) 90 60 30 60 90 60 30 120 150 30 C 0 0 C90 Rated luminous flux of lamps: approx. 5.600 lm ( 70 W/HSE) approx. 14.000 lm (150 W/HSE) approx. 6.300 lm (125 W/HME) approx. 5.900 lm ( 70 W/HIE) approx. 13.000 lm (150 W/HIE) l/cd/klm Light fitting efficiency in operation: ap. 74 % (witho. AR) Light fitting efficiency in operation: ap. 61 % (with AR) 60 90 90
285 294 Ø 254 10 Ceiling mounting Ø 8 Wall mounting Thread 1 1 /4” BSP 370 225 Pole mounting 119 94.5 335 207 94.5 334 25° 318 182 168 355 373 ZONE 1 ZONE 2 ZONE 21 ZONE 22 E X - P E N D A N T L I G H T F I T T I N G S A N D F L O O D L I G H T S Technical data E X - P E N D A N T L I G H T F I T T I N G I NVMV CHAMP I NVMV CHAMP Type NVMV CHAMP for high pressure discharge lamp up to 150 W Marking to 94/9/EC II 3 G/ II 3 D 1) Type of protection EEx nR II, temperature class depents on lamp power Conformity statement PTB 00 ATEX 2215 Enclosure material copper-free aluminium with epoxy powder coating Transparent cover Borosilicat glass Rated voltage 240 V/50 Hz, other voltage on request Power factor cos ϕ > 0.9 Protection category to EN 60529 IP 66/67 Insulation class I Permissible ambient temperature –20 °C up to +55 °C Cable entries Drilling 4 x M25 x 1.5 with blanking plug M25 Connecting terminals L, N and PE; max. 2 x 2.5 mm 2 Lamp holder E 27 resp. E 40 (150 W) to IEC 60238 Weight see ordering details 1) Max. surface temperatures for dust Ex-areas on request Ordering details Type Mounting HSE HME HIE Temp.- Weight Order No. NVMV ... class (approx. kg) S2MC076P000 Ceiling 70 W T4 6.6 1 2341 000 001 S2MC156P000 Ceiling 150 W T3 7.0 1 2341 000 002 H2MC126P000 Ceiling 125 W T3 7.0 1 2341 000 003 M2MC076P000 Ceiling 70 W T4 6.6 1 2341 000 004 M2MC156P000 Ceiling 150 W T3 7.0 1 2341 000 005 S2MW076P000 Wall 70 W T4 6.6 1 2341 000 051 S2MW156P000 Wall 150 W T3 7.0 1 2341 000 052 H2MW126P000 Wall 125 W T3 7.0 1 2341 000 053 M2MW076P000 Wall 70 W T4 6.6 1 2341 000 054 M2MW156P000 Wall 150 W T3 7.0 1 2341 000 055 S4BJ076P000 Thread* 1 1 /4”, BSP 70 W T4 6.6 1 2341 000 101 S4BJ156P000 Thread* 1 1 /4”, BSP 150 W T3 7.0 1 2341 000 102 H4BJ126P000 Thread* 1 1 /4”, BSP 125 W T3 7.0 1 2341 000 103 M4BJ076P000 Thread* 1 1 /4”, BSP 70 W T4 6.6 1 2341 000 104 M4BJ156P000 Thread* 1 1 /4”, BSP 150 W T3 7.0 1 2341 000 105 *Thread for pole mounting Scope of delivery without illuminant and fixing accessories. See fixing materials and fixing accessories for Ex-pendant light fittings and floodlights on page 4.34. Dimensions in mm CEAG SICHERHEITSTECHNIK GMBH 4.29 4.29 1 2 3 4 5 6 7 8 9
Page 1:
C A T A L O G U E 3 1 0 E X P L O S
Page 4 and 5:
How do you profit from the fact tha
Page 6 and 7:
0 1 2 3 4 5 6 7 8 9 10
Page 8 and 9:
R E G U L A T I O N S from A to Z E
Page 10 and 11:
0.4 R E G U L A T I O N S F R O M A
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
0.10 R E G U L A T I O N S F R O M
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
P O R T A B L E E X - L A M P S INF
Page 24 and 25:
1.2 1 2 3 4 5 6 7 8 9 P O R T A B L
Page 26 and 27:
1.4 1 2 3 4 5 6 7 8 9 P O R T A B L
Page 28 and 29:
E X - T O R C H L I G H T S Stabex
Page 30 and 31:
E X - T O R C H L I G H T Stabex M0
Page 32 and 33:
E X - H A N D L A M P HE 5 EN The H
Page 34 and 35:
E X - H A N D L A M P HE 8 N EN Thi
Page 36 and 37:
E X - H A N D L A M P S HE 8 EURO H
Page 38 and 39:
E X - S E A R C H L I G H T SEB 7 S
Page 40 and 41:
E X - S E A R C H L I G H T SEB 8 S
Page 42 and 43:
1.20 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 44 and 45:
E X - C A P L I G H T HLE 7 L EN Th
Page 46 and 47:
E X - T A N K I N S P E C T I O N L
Page 48 and 49:
1.26 1 2 3 4 5 6 7 8 9 A C C E S S
Page 50 and 51:
E X - F L U O R E S C E N T L I G H
Page 52 and 53:
2.2 1 2 3 4 5 6 7 8 9 E X - F L U O
Page 54 and 55:
2.4 1 2 3 4 5 6 7 8 9 E X - L I G H
Page 56 and 57:
2.6 1 2 3 4 5 6 7 8 9 E X - F L U O
Page 58 and 59:
2.8 1 2 3 4 5 6 7 8 9 E X - F L U O
Page 60 and 61:
E X - B U I L T - O N F I T T I N G
Page 62 and 63:
2.12 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 64 and 65:
E X - P O L E M O U N T E D F I T T
Page 66 and 67:
EX-EMERGENCY LIGHT FITTING eLLK 92.
Page 68 and 69:
2.18 1 2 3 4 5 6 7 8 9 E X - F L U
Page 70 and 71:
2.20 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 72 and 73:
EX-RECESSED CEILING LIGHT FITTING e
Page 74 and 75:
2.24 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 76 and 77:
EX-EMERGENCY RECESSED CEILING LIGHT
Page 78 and 79:
2.28 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 80 and 81:
EX-BUILT-ON LIGHT FITTINGS AB 12...
Page 82 and 83:
2.32 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 84 and 85:
2.34 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 86 and 87:
EX-BUILT-ON LIGHT FITTINGS nLLK 98.
Page 88 and 89:
2.38 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 90 and 91:
EX-BUILT-ON LIGHT FITTINGS FVS 2 x
Page 92 and 93:
F I X I N G S Y S T E M S Complete
Page 94 and 95: FIXING MATERIALS AND ACCESSORIES Ex
Page 96 and 97: 2.46 1 2 3 4 5 6 7 8 9 A C C E S S
Page 98 and 99: 2.48 1 2 3 4 5 6 7 8 9 A C C E S S
Page 100 and 101: E X - S I G N A L - A N D E S C A P
Page 102 and 103: 3.2 1 2 3 4 5 6 7 8 9 E X - S I G N
Page 104 and 105: E X - E S C A P E S I G N L U M I N
Page 106 and 107: EX-EMERGENCY LIGHT FITTING AB 12108
Page 108 and 109: EX-EMERGENCY LIGHT FITTING EE11 PL
Page 110 and 111: EX-SIGNAL AND EMERGENCY LIGHT FITTI
Page 112 and 113: EX-SAFETY AND EMERGENCY LIGHT FITTI
Page 114 and 115: FIXING MATERIALS AND ACCESSORIES On
Page 116 and 117: E X - P E N D A N T A N D F L O O D
Page 118 and 119: 4.2 1 2 3 4 5 6 7 8 9 E X - P E N D
Page 120 and 121: EX-CEILING AND PENDANT LIGHT FITTIN
Page 122 and 123: 4.6 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 124 and 125: E X - P E N D A N T L I G H T F I T
Page 126 and 127: 4.10 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 132 and 133: EX-FLOODLIGHT LIGHT FITTINGS FZD EN
Page 136 and 137: E X - F L O O D L I G H T dTLS 85..
Page 138 and 139: E X - F L O O D L I G H T PX... for
Page 142 and 143: E X - V E S S E L L I G H T F I T T
Page 148 and 149: EX-FLOODLIGHT LIGHT FITTING NFMV fo
Page 150 and 151: ACCESSORIES AND FIXING MATERIALS Ex
Page 152 and 153: 4.36 1 2 3 4 5 6 7 8 9 ACCESSORIES
Page 158 and 159: E X - I N S T A L L A T I O N U N I
Page 160 and 161: 5.2 1 2 3 4 5 6 7 8 9 E X - I N S T
Page 162 and 163: 5.4 1 2 3 4 5 6 7 8 9 E X - I N S T
Page 164 and 165: 5.6 1 2 3 4 5 6 7 8 9 E X - I N S T
Page 166 and 167: E X - I N S T A L L A T I O N S W I
Page 168 and 169: EX-PLUGS AND SOCKETS 10 A to 125 A
Page 186 and 187: E X - P L U G A N D S O C K E T 16
Page 188 and 189: E X - P L U G S A N D S O C K E T S
Page 194 and 195:
5.36 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 196 and 197:
5.38 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 198 and 199:
PLUGS AND SOCKETS - INDUSTRY 16 A u
Page 200 and 201:
5.42 1 2 3 4 5 6 7 8 9 I N D U S T
Page 202 and 203:
5.44 1 2 3 4 5 6 7 8 9 I N D U S T
Page 204 and 205:
5.46 1 2 3 4 5 6 7 8 9 I N D U S T
Page 206 and 207:
5.48 1 2 3 4 5 6 7 8 9 I N D U S T
Page 208 and 209:
EX-REPAIR AND MAINTENANCE SOCKETS 1
Page 210 and 211:
5.52 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 212 and 213:
5.54 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 214 and 215:
EX-REPAIR AND MAINTENANCE SOCKET DI
Page 216 and 217:
PORTABLE EX-MULTI-OUTLET DISTRIBUTI
Page 218 and 219:
P O R T A B L E E X - C A B L E R E
Page 220 and 221:
FIXING MATERIALS AND ACCESSORIES In
Page 222 and 223:
5.64 1 2 3 4 5 6 7 8 9 E X - I N S
Page 224 and 225:
5.66 1 2 3 4 5 6 7 8 9 E X - I N S
Page 226 and 227:
E x - J U N C T I O N B O X Plastic
Page 228 and 229:
5.70 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 230 and 231:
E X - B R A N C H I N G B O X E S L
Page 232 and 233:
UNIVERSAL TERMINAL BOXES Ex-e/Ex-i
Page 234 and 235:
5.76 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 236 and 237:
5.78 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 238 and 239:
5.80 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 240 and 241:
5.82 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 242 and 243:
5.84 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 244 and 245:
5.86 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 246 and 247:
E X - T E R M I N A L B O X E S Lig
Page 248 and 249:
5.90 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 250 and 251:
E X - T E R M I N A L B O X E S Lig
Page 252 and 253:
5.94 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 254 and 255:
E X - T E R M I N A L B O X E S Sta
Page 256 and 257:
5.98 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 258 and 259:
5.100 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 260 and 261:
5.102 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 262 and 263:
E X - C O N N E C T I O N A N D J U
Page 264 and 265:
5.106 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 266 and 267:
5.108 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 268 and 269:
FITTING MATERIALS AND ACCESSORIES D
Page 270 and 271:
5.112 1 2 3 4 5 6 7 8 9 E X - I N S
Page 272 and 273:
E X - C A B L E E N T R I E S Plast
Page 274 and 275:
5.116 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 276 and 277:
5.118 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 278 and 279:
5.120 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 280 and 281:
5.122 1 2 3 4 5 6 7 8 9 E X - I N S
Page 282 and 283:
E X - C A B L E E N T R I E S Metal
Page 284 and 285:
5.126 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 286 and 287:
5.128 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 288 and 289:
5.130 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 290 and 291:
5.132 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 292 and 293:
5.134 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 294 and 295:
5.136 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 296 and 297:
5.138 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 298 and 299:
5.140 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 300 and 301:
E X - C O N T R O L U N I T S A N D
Page 302 and 303:
6.2 1 2 3 4 5 6 7 8 9 E X - C O N T
Page 304 and 305:
E X - C O N T R O L S T A T I O N S
Page 306 and 307:
6.6 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 308 and 309:
6.8 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 310 and 311:
6.10 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 312 and 313:
6.12 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 314 and 315:
6.14 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 316 and 317:
6.16 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 318 and 319:
Page 320 and 321:
6.20 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 322 and 323:
6.22 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 324 and 325:
Page 326 and 327:
6.26 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 328 and 329:
6.28 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 330 and 331:
Page 332 and 333:
6.32 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 334 and 335:
E X - C O N T R O L S T A T I O N F
Page 336 and 337:
E X - C O N T R O L S T A T I O N F
Page 338 and 339:
Page 340 and 341:
6.40 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 342 and 343:
6.42 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
6.48 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 350 and 351:
6.50 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 352 and 353:
6.52 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 354 and 355:
6.54 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 356 and 357:
6.56 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 358 and 359:
6.58 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 360 and 361:
6.60 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 362 and 363:
6.62 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 364 and 365:
6.64 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 366 and 367:
6.66 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 368 and 369:
6.68 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 370 and 371:
6.70 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 372 and 373:
6.72 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 374 and 375:
6.74 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 376 and 377:
6.76 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 378 and 379:
6.78 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 380 and 381:
6.80 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 382 and 383:
6.82 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 384 and 385:
6.84 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 386 and 387:
E X - C O N T R O L A N D S I G N A
Page 388 and 389:
6.88 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 390 and 391:
6.90 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 392 and 393:
6.92 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 394 and 395:
6.94 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 396 and 397:
6.96 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 398 and 399:
6.98 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 400 and 401:
6.100 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 402 and 403:
6.102 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 404 and 405:
6.104 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 406 and 407:
FIXING MATERIALS AND ACCESSORIES Co
Page 408 and 409:
6.108 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 410 and 411:
6.110 1 2 3 4 5 6 7 8 9 F I X I N G
Page 412 and 413:
6.112 1 2 3 4 5 6 7 8 9 F I X I N G
Page 414 and 415:
6.114 1 2 3 4 5 6 7 8 9 F I X I N G
Page 416 and 417:
E X - C O N T R O L S W I T C H E S
Page 418 and 419:
6.118 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 420 and 421:
6.120 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 422 and 423:
E X - C O N T R O L S W I T C H E S
Page 424 and 425:
6.124 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 426 and 427:
6.126 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 428 and 429:
FIXING MATERIALS AND ACCESSORIES Co
Page 430 and 431:
6.130 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 432 and 433:
E X - S A F E T Y A N D M A I N C U
Page 434 and 435:
7.2 1 2 3 4 5 6 7 8 9 E X - S A F E
Page 436 and 437:
E X - S A F E T Y S W I T C H E S U
Page 438 and 439:
7.6 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 440 and 441:
7.8 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 442 and 443:
ZONE 1 ZONE 2 ZONE 21 ZONE 22 E X -
Page 444 and 445:
7.12 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 446 and 447:
7.14 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 448 and 449:
7.16 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 450 and 451:
I N D U S T R I A L S A F E T Y S W
Page 452 and 453:
7.20 1 2 3 4 5 6 7 8 9 I N D U S T
Page 454 and 455:
7.22 1 2 3 4 5 6 7 8 9 I N D U S T
Page 456 and 457:
7.24 1 2 3 4 5 6 7 8 9 I N D U S T
Page 458 and 459:
7.26 1 2 3 4 5 6 7 8 9 I N D U S T
Page 460 and 461:
EX-MAIN CURRENT SWITCHES Up to 630
Page 462 and 463:
7.30 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 464 and 465:
EX-POWER CIRCUIT BREAKERS Up to 630
Page 466 and 467:
7.34 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 468 and 469:
7.36 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 470 and 471:
7.38 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 472 and 473:
EX-MANUAL MOTOR STARTERS Up to 25 A
Page 474 and 475:
7.42 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 476 and 477:
FIXING MATERIALS AND ACCESSORIES Sa
Page 478 and 479:
7.46 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 480 and 481:
7.48 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 482 and 483:
E X - C O N T R O L A N D D I S T R
Page 484 and 485:
8.2 1 2 3 4 5 6 7 8 9 E X - C O N T
Page 486 and 487:
8.4 1 2 3 4 5 6 7 8 9 E X - C O N T
Page 488 and 489:
E X - D I S T R I B U T I O N S Mou
Page 490 and 491:
8.8 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 492 and 493:
E X - D I S T R I B U T I O N S Sta
Page 494 and 495:
8.12 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 496 and 497:
EX-BUILT-IN COMPONENTS Flameproof e
Page 498 and 499:
8.16 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 500 and 501:
8.18 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 502 and 503:
8.20 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 504 and 505:
8.22 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 506 and 507:
8.24 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 508 and 509:
8.26 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 510 and 511:
8.28 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 512 and 513:
8.30 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 514 and 515:
8.32 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 516 and 517:
8.34 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 518 and 519:
8.36 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 520 and 521:
8.38 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 522 and 523:
8.40 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 524 and 525:
E X - D D I S T R I B U T I O N S w
Page 526 and 527:
8.44 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 528 and 529:
8.46 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 530 and 531:
8.48 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 532 and 533:
EX-ENCLOSURES AND DISTRIBUTIONS mad
Page 534 and 535:
8.52 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 536 and 537:
8.54 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 538 and 539:
8.56 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 540 and 541:
8.58 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 542 and 543:
8.60 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 544 and 545:
8.62 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 546 and 547:
E Q U I P M E N T W I T H A D D I T
Page 548 and 549:
E X - P R O T E C T I O N W O R L D
Page 550 and 551:
9.4 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 552 and 553:
9.6 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 554 and 555:
9.8 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE 2
Page 556 and 557:
9.10 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 558 and 559:
9.12 1 2 3 4 5 6 7 8 9 ZONE 1 ZONE
Page 560 and 561:
10.2 I N D E X O F O R D E R C O D
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
10.16 10.16 CEAG SICHERHEITSTECHNIK
Page 576:
CEAG Sicherheitstechnik GmbH Neuer
show all

catalogue 3 1 0 explosionprotectedpro ducts

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?