catalogue 3 1 0 explosionprotectedpro ducts

EX-SAFETY AND EMERGENCY LIGHT FITTING
SL/RZ 6011.1
according to EN 50021 for Zone 2
The Ex-safety and emergency exit luminaire
SL/RZ 6011.1 are in accordance to the
ATEX-Directive 94/9/EG.
They are built and tested according to the
European Norm EN 50021 for explosionprotected
products for Zone 2 as well as
the European Norm EN 60598, Part 2.22
for emergency light fittings.
They are certified for the illumination of
emergency exit routes, as well as for the
marking of exit doors in Zone 2 hazardous
areas, especially in conjunction with
emergency lighting apparatus.
Housing and protective cover are made of
polycarbonate. They are fitted with electronic
ballasts and an 8 W fluorescent lamp.
There are 3 emergency exit stickers provided
for direct application where needed.
Due to their robust architecture and the
high safety standard, they can be used as
an in and/or outdoor light fitting.
With the CG-S-Module (for max. 20 light fittings)
they can be connected as singularly
monitored emergency light fittings to the
CEAG emergency lighting supply system.
The switching mode can be freely programmed
by the operator for mixed operation
in a single circuit.
Housing/Cover made of Polycarbonate
Energy-saving EVG
with 8 W fluorescent lamp
Safety standard IP 54
Connection to the CEAG emergency
lighting supply system possible
3.12
Polar curve
SL 6011.1 CG-S ⎮ SL 6011.1
90
60
40
800
120
30
160
200
30
C 0
0
C90 l/cd/klm
Rated luminous flux of lamps: 1 x 8 W = 450 lm
60
90