2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Chapter 3 — DPNSS1/DASS2 features description and implementation Page 807 of 1536
Feature packaging
The DPNSS1/DASS2 Uniform Dialing Plan Interworking feature is part of
basic X11 system software. The following package is required:
— Network Alternate Route Selection (NARS) package 58.
Basic Alternate Route Selection (BARS) package 57 may also be equipped.
For on-net and off-net routing capabilities, the following package is required:
— Flexible Numbering Plan (FNP) package 160.
If more ESN functions are desired the following packages are required:
— Network Traffic Measurement (NTRF) package 29
— Network Authorization Code (NAUT) package 63
— Basic Authorization Code (BAUT) package 25
— System Speed Call (SSC) package 34
— Network Speed Call (NSCL) package 39, and
— Directory Number Expansion (DNXP) package 150.
If a Group Dialing Plan is to be used, the following package is required:
— Coordinated Dialing Plan (CDP) package 59.
If displays are required, the following package must be equipped:
— Digit Display (DDSP) package 19.
The following packages are required for DASS2/DPNSS1:
— Integrated Digital Access (IDA) package 122
— Digital Private Network Signaling System 1 (DPNSS) package 123
— Digital Access Signaling System 2 (DASS2) package 124, and
— International Supplementary Features (SUPP) package 131.
— 2.0 Mbps Primary Rate Interface (PRI2) package 154 is a prerequisite.
Option 11C 2.0 Mb DTI/PRI Administration and Maintenance guide