2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Chapter 13 — ISDN Feature Implementation Page 1109 of 1536
LD 16 - Enable the Display of Access Prefix on CLID feature.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer Number as defined in LD 15.
ROUT xxx Route number.
xxx = 0-511 for Options 51C, 61C, 81, and 81C.
xxx = 0-127 for Option 11C.
... ...
ISDN YES Integrated Services Digital Network route.
... ...
DAPC YES Enable feature at the route data block Level.
YES = Enable Display Access Prefix CLID.
(NO) = (default) Disable feature at the route data block level.
-TBL 1-15 Prefix table number as defined in LD 15.
Note 1: Set related printing is done in Overlay 20. Overlay 20 is modified to allow the printing of the Class of
Service for Access Prefix display allowed or denied.
Note 2: To print the table number associated with the route data block, the feature is enabled at the route data
block level.
LD 21- Print the table number associated with the route data block.
Prompt Response Description
REQ PRT Print route/customer data block.
TYPE FTR_DATA/FT
R
Route data block/Prefix table
TBL 0-15 Prefix table number. When a is entered all the
configured tables for that customer are printed.
Option 11C 2.0 Mb DTI/PRI Administration and Maintenance guide