2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Chapter 3 — DPNSS1/DASS2 features description and implementation Page 755 of 1536
Feature implementation
Note: Prior to configuring DPNSS1 Message Waiting Indication, the
DPNSS1 Call Diversion feature must be configured and one of the
following redirection features must also be activated: Call Forward All
Calls, Call Forward No Answer, Call Forward by Call Type, Call
Forward Busy, Hunting/Group Hunting, ICP Call Forward All Calls and
Internal Call Forward. To configure, refer to the DPNSS1 Call Diversion
feature in this guide.
LD 15 – Add, change or delete a Message Waiting Indication NSI table.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data
TYPE NET Networking data block.
CUST xx Customer number.
...
DMWM YES Enable output of error messages.
(NO) = disables output of error messages (default).
MWNS YES Recognize Message Waiting Indication NSI string.
(NO)= Do not recognize Message Indication NSI string
(default).
- REQ (NEW) Create new NSI table (default).
OUT = Delete Message Waiting Indication table.
Option 11C 2.0 Mb DTI/PRI Administration and Maintenance guide