2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Chapter 3 — DPNSS1/DASS2 features description and implementation Page 819 of 1536
LD 15 – The SAMM prompt must be set to YES to enable Standalone
Meridian Mail.
Prompt Response Description
REQ NEW, CHG New, or change.
TYPE CDB
IMS
...
LD 10 – Configuration of Standalone Mail Message Servers in this overlay is
only necessary when using links to iSDX nodes. The SAMM prompt must be
set to YES in LD 15 to enable all call processing functions for Standalone
Meridian Mail.
Feature operation
Customer data block.
Release 21 gate opener.
IMS YES Integrated Message System.
SAMM YES, NO Allow or disallow Standalone Meridian
Mail.
Prompt Response Description
REQ NEW New.
TYPE 500 Analog PBX set.
...
CLS SMSA,
SMSD
Allow or disallow Standalone Meridian Mail
Server.
This feature enables incoming calls arriving at a third party vendor’s PBX to
be diverted to Meridian Mail via DPNSS1. The identity of the calling and
called parties is given in the Calling Line Category (CLC) of the DPNSS1
message sent by the third party vendor’s PBX. The Standalone Meridian Mail
feature uses this information to access the correct mailbox on the Meridian
Mail system. Telephone set operation is the same for Standalone Meridian
Mail as it is for Meridian Mail.
Option 11C 2.0 Mb DTI/PRI Administration and Maintenance guide