2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Page 1198 of 1536 Chapter 13 — ISDN Feature Implementation
- - INC_T306 0-(2)-240 Variable timer for received DISCONNECT message on
incoming calls allowing in-band tone to be heard when
the network sends in-band tone.
T306 is the duration of the network timer in seconds.
The network will stop sending after T306 times out, so
the maximum time will be T306. The value is stored in
two-second increments, which are rounded up.
- - OUT_T306 0-(30)-240 Variable timer for received DISCONNECT message on
outgoing calls allowing in-band tone to be heard when
the network sends in-band tone.
T306 is the duration of the network timer in seconds.
The network will stop sending after T306 times out, so
the maximum time will be T306. The value is stored in
two-second increments, which are rounded up.
- LAPD YES Allows the changing of the layer 2 timer.
NO = Do not allow the changing of the layer 2 timer
(default).
...
PARM YES Change system parameters.
FCDR NEW Use new CDR format (recommended for Japan).
OCAC YES Support the Original Carrier Access Code format.
NO = Do not support the Original Carrier Access Code
format (default).
MTRO (MR)
PPM
553-3011-315 Standard 10.0 May 1999
Message Registration (default).
Periodic Pulse Metering.