2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

EuroISDN Continuation Phase III
Chapter 13 — ISDN Feature Implementation Page 1141 of 1536
LD 15 – Configure the Optional Sending of Forwarding CLID functionality
(in response to the OCLI prompt).
Prompt Response Description
REQ: CHG Change existing data.
TYPE: NET Networking data.
CUST xx Customer number.
...
ISDN YES Integrated Services Digital Network.
PNI (0)-32700 Private Network Identifier.
...
SATD 0-(1)-5 Satellite Delays.
OCLI (NO)
....
EXT
ALL
NO = No manipulation is done on outgoing CLID for calls
forwarded over EuroISDN links.
EXT = The last forwarding DN is sent as CLID information
for incoming calls over a standard ISDN (EuroISDN, APAC,
NI-2) DID or CO link to a gateway Meridian 1 node, and
redirected back over the standard ISDN (EuroISDN, APAC,
NI-2) DID or CO link.
ALL = The same as for EXT. Moreover, the last forwarding
DN is sent as CLID information for internal calls from a local
set or over ISDN TIE trunks, except for DPNSS1 calls which
are redirected from a gateway node over a standard ISDN
(EuroISDN, APAC, NI-2) DID or CO link.
If the redirection does not occur at the gateway node, the
redirecting information number, if present in the incoming
SETUP message received at the gateway node from the
private network, is sent as CLID.
Option 11C 2.0 Mb DTI/PRI Administration and Maintenance guide