2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Call Connection Restriction
Chapter 13 — ISDN Feature Implementation Page 1091 of 1536
To configure the operation of the Call Connection Restriction product
improvement, enter responses to the following prompts in overlay 15.
RCNT: This limits the number of call redirections to be allowed in a call
connection. Respond to this prompt with the limit, from 0 to 5.
(The default is 1.)
PSTN: This limits to one the number of PSTNs allowed in a call connection.
Respond to this prompt with YES to place the limit; respond with NO to
allow an unlimited number of PSTNs in a call connection.
TNDM: This limits the number of tandem connections allowed in a call
connection. Respond to this prompt with the limit, from 0 to 31
(the default value is 15).
PCMC: This limits the number of µ/A-Law conversions to be allowed in a
call connection. Respond to this prompt with the limit, from 0 to 31.
(the default value is 15).
SATD: This limits the number of Satellite delays to be allowed in a call
connection. Respond to this prompt with the limit, from 0 to 5.
(the default value is 1).
The above prompts only appear if the ISDN prompt in overlay 15 is set to
YES. For more information on the prompts presented in overlay 15, refer to
the Option 11 software guides.
Option 11C 2.0 Mb DTI/PRI Administration and Maintenance guide