2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Page 1448 of 1536 Appendix A — Network Numbering
Step 4: Use LD 86 to define NAS routing and time schedule.
553-3011-315 Standard 10.0 May 1999
Prompt Response Description
REQ NEW/ CHG
CUST XX
FEAT NAS Network Attn service
TBL 0-63 Table 0 is for the customer, other tables are
for Tenant service NAS
ALT X 1-7 Attendant alternative no.
ID XXX Remote attendant access code.
This code is programmed in either CDP or
NARS to control routing
ALT Carriage to stop ALT
TODS 0 Default catch-all period
ALST n n n n Attn alternative list ( up to 4 ALT per
schedule). If no entry then local Attendant is
used
TODS 1-31
PER hh mm hh start and stop time, minute must be 0 or 30
mm
start time must be less than stop time
DAYS D,-- D up to 7 days (1-7 ), 1=mon, 7= Sunday
ALST n n n n Attn alternative list ( up to 4 ALT per
schedule).If no entry then local Attendant is
used
DBK y/n y/n y/n
y/n
QUE y/n y/n y/n
y/n
TODS 1-31 Repeated
Drop back to originating node if congestion
is received from the above Attn alternative
list
Queuing to a route for the above Attn
alternative list