2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Page 1042 of 1536 Chapter 13 — ISDN Feature Implementation
LD 12 – Assign a Meter Recall key to the Attendant Console.
Prompt Response Description
REQ NEW, CHG New, or change.
TYPE aaaa Type of console, where aaaa = 1250 for M1250 console,
2250 for M2250 console, ATT for QCW3, QCW4 console,
or PWR if the TN is used for power or Attendant
Supervisory Module ASM.
TN c u Terminal Number.
...
KEY xx MTR Assign a Meter recall key on the attendant console.
1TR6 (end of call)
LD 12 – Assign a Meter recall key on the Attendant Console.
Prompt Response Description
REQ CHG Change existing data.
TYPE ATT QCW3 or QCW4 Attendant Console data block.
TN c u Terminal Number.
...
KEY x MTR
x NULL
553-3011-315 Standard 10.0 May 1999
key number, Meter key.
Remove a Meter key.