2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

Page 1068 of 1536 Chapter 13 — ISDN Feature Implementation
LD 27 - Configure a Digital Subscriber Loop (DSL) for an ISDN BRI trunk.
Prompt Response Comment
REQ NEW
CHG
553-3011-315 Standard 10.0 May 1999
Add new data
Change existing data.
TYPE DSL Digital Subscriber Loop data block.
DSL lll s cc dsl# DSL Terminal Number location (Options 51C-81/81C).
lll (superloop) = 0-156 (must be zero or a number divisible
by 4)
s (shelf) = 0-1
cc (card) = 0-15
dsl# (DSL location) = 0-7
cc sdl DSL Terminal Number location (Option 11C).
cc (card) = 1-20
dsl# (DSL number) = 0-7
APPL BRIE BRI trunk application for Australia ETSI.
CUST xx Customer number, as defined in LD 15.
xx = 0-99 (Options 51C-81/81C).
xx = 0-31 (Option 11C).
CTYP SILC Interface card type is SILC.
MISP 0-158
0-9
MISP loop number for Options 51C-81/81C
MISP loop number for Option 11C.
MODE TE Enter TE (user side) as the mode for Australia ETSI.
- MTFM (NO) YES BRI multiframe option.
TKTP TIE
COT
DID
TIE trunk type.
Central Office Trunk type.
Direct Inward Dialing trunk type.
Must be the same entry as defined in LD 16.
CLOK (NO) YES (Do not) use the DSL as the clock source.
PDCA (1)-16 Pad table number.