25.06.2013 Views

2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

2.0 Mb DTI/PRI Administration and Maintenance Guide Book ... - Home

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Page 1276 of 1536 Chapter 13 — ISDN Feature Implementation<br />

LD 17 – Configure the method of Operation Coding for the Name Display<br />

supplementary services, for the associated QSIG D-Channel.<br />

The value is configured as a remote capability. It may be either by Object<br />

Identifier, used for ETSI, or by Integer Value, used for ISO.<br />

Prompt Response Description<br />

REQ CHG Change existing data.<br />

TYPE ADAN Action Device <strong>and</strong> Number.<br />

- ADAN CHG DCH xx Change a D-Channel on port 0-63<br />

(Options 51C-81C).<br />

...<br />

- IFC ESGF<br />

ISGF<br />

...<br />

- RCAP<br />

...<br />

CHG DCH xx Change a D-Channel on port 0-15 (Option 11C).<br />

NDO<br />

NDI<br />

553-3011-315 St<strong>and</strong>ard 10.0 May 1999<br />

ESGF = ETSI QSIG interface with GF platform.<br />

ISGF = ISO QSIG interface with GF platform.<br />

Enter the Operation Coding method for the QSIG Name<br />

Display supplementary services.<br />

NDO = Coding by Object ID (IFC should be set to ESGF).<br />

NDI = Coding by Integer Value (IFC should be set to ISGF).<br />

Precede the entry with an ‘X’ to delete it.<br />

Note: NDO <strong>and</strong> NDI are mutually exclusive.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!