You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KM Micro/KM Mini Center Height Adjustment Feature for Flange Clamping Units<br />
KM Micro flange mounts can adjust insert center height via a cam pin to be<br />
purchased separately. To do this:<br />
1. Remove the locating pin that is installed in the flange mount clamping unit.<br />
2. Install the adjusting cam in the toolblock-locating pin hole.<br />
3. Install the flange mount clamping unit to the toolblock, ensuring the cam<br />
portion of the adjusting pin locates within the slot on the back side of<br />
the flange.<br />
4. To adjust, simply access the hex through the locating pin hole of the flange<br />
unit and rotate to set center height with mounting screws loose.<br />
5. Tighten the mounting bolts to the required torque for the specific bolt size.<br />
KM<br />
size<br />
order<br />
number<br />
catalog<br />
number<br />
12 1925860 MICROCAM12<br />
16, 25, 3225 1851803 MICROCAM16<br />
What is KM1612/KM2016/KM2520/KM3225 for ID Machining?<br />
The KM1612/KM2016/KM2520/KM3225 is the ID endworking tooling<br />
product line to complement the KM12/KM16/KM20/KM25 OD turning<br />
tooling product line.<br />
• Products are through-coolant capable.<br />
• External tapers are the same as KM12/KM16/KM20/KM25.<br />
Major difference is center height location of the insert.<br />
H1<br />
www.kennametal.com<br />
KM12/KM16/KM20/KM25<br />
Square shank cutting units<br />
Insert is above centerline<br />
<strong>Technical</strong> <strong>Information</strong><br />
KM Micro /KM Mini Manual Clamping System<br />
Adjusting Cam<br />
Mounting Screws (4x)<br />
Round shank clamping units<br />
KM1612/KM2016/KM2520/KM3225<br />
Centerline cutting units<br />
Insert is on centerline<br />
M65<br />
<strong>Technical</strong> <strong>Information</strong>