ECL Comfort 210/310, A217/A317 Installation Guide - Danfoss ...
ECL Comfort 210/310, A217/A317 Installation Guide - Danfoss ...
ECL Comfort 210/310, A217/A317 Installation Guide - Danfoss ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Installation</strong> <strong>Guide</strong> <strong>ECL</strong> <strong>Comfort</strong> <strong>210</strong> / <strong>310</strong>, application <strong>A217</strong> / <strong>A317</strong><br />
6.8.7 Raw input overview<br />
Measured temperatures, input status and voltages are displayed.<br />
In addition, a detection of malfunctions can be chosen for activated<br />
temperature inputs.<br />
Monitoring the sensors:<br />
Choose the sensor which measures a temperature, for example the<br />
S5. When the dial is pressed, a magnifying glass appears in the<br />
selected line. The S5 temperature is now being monitored.<br />
Alarm indication:<br />
Should the connection to the temperature sensor be disconnected,<br />
short-circuited or the sensor itself be defective, the alarm function<br />
is activated.<br />
In the "Raw input overview" an alarm symbol is shown at the<br />
defective temperature sensor in question.<br />
Resetting the alarm:<br />
Choose the sensor (S number) for which you want to clear the<br />
alarm. Press the dial. The magnifying glass and alarm symbols<br />
disappear.<br />
When the dial is pressed again, the monitoring function is<br />
reactivated.<br />
6.8.8 Display<br />
Backlight (display brightness) 60058<br />
Circuit Setting range Factory setting<br />
Adjust the brightness of the display.<br />
0: Weak backlight.<br />
10: Strong backlight.<br />
0 ... 10 5<br />
Contrast (display contrast) 60059<br />
Circuit Setting range Factory setting<br />
Adjust the contrast of the display.<br />
0: Low contrast.<br />
10: High contrast.<br />
0 ... 10 3<br />
The temperature sensor inputs have a measuring range from -60 ...<br />
150 ° C.<br />
If a temperature sensor or its connection breaks, the value indication<br />
is " - - ".<br />
If a temperature sensor or its connection is short-circuited, the value<br />
indication is " - - - ".<br />
102 DEN-SMT/DK VI.LG.U2.02 <strong>Danfoss</strong> District Energy