ECL Comfort 210/310, A217/A317 Installation Guide - Danfoss ...
ECL Comfort 210/310, A217/A317 Installation Guide - Danfoss ...
ECL Comfort 210/310, A217/A317 Installation Guide - Danfoss ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Installation</strong> <strong>Guide</strong> <strong>ECL</strong> <strong>Comfort</strong> <strong>210</strong> / <strong>310</strong>, application <strong>A217</strong> / <strong>A317</strong><br />
Application Key: Situation 1<br />
The controller is new from the factory, the <strong>ECL</strong> Application Key<br />
is not inserted.<br />
An animation for the <strong>ECL</strong> Application Key insertion is displayed.<br />
Insert the Application Key .<br />
Application Key name and Version is indicated (example: A266<br />
Ver. 1.03).<br />
If the <strong>ECL</strong> Application Key is not suitable for the controller, a "cross"<br />
is displayed over the <strong>ECL</strong> Application Key-symbol.<br />
Action: Purpose: Examples:<br />
Select language<br />
Confirm<br />
Select application<br />
Confirm with ‘Yes’<br />
Set 'Time & Date'<br />
Turn and push the dial to select and<br />
change 'Hours', 'Minutes', 'Date',<br />
'Month' and 'Year'.<br />
Choose ''Next'<br />
Confirm with ‘Yes’<br />
Go to ‘Aut. daylight’<br />
Choose whether ‘Aut. daylight´ *<br />
should be active or not<br />
YES or NO<br />
* ‘Aut. daylight’ is the automatic changeover between summer<br />
and winter time.<br />
Depending on the contents of the <strong>ECL</strong> Application Key, procedure<br />
A or B is taking place:<br />
A<br />
The <strong>ECL</strong> Application key contains factory settings:<br />
The controller reads / transfers data from the <strong>ECL</strong> Application Key<br />
to <strong>ECL</strong> controller.<br />
The application is installed, and the controller resets and starts up.<br />
B<br />
The <strong>ECL</strong> Application key contains changed system settings:<br />
Push the dial repeatedly.<br />
’NO’: Only factory settings from the <strong>ECL</strong> Application Key will<br />
be copied to the controller.<br />
’YES*: Special system settings (differing from the factory<br />
settings) will be copied to the controller.<br />
If the key contains user settings:<br />
Push the dial repeatedly.<br />
‘NO: Only factory settings from the <strong>ECL</strong> Application Key will<br />
be copied to the controller.<br />
‘YES*: Special user settings (differing from the factory settings)<br />
will be copied to the controller.<br />
* If ‘YES’ cannot be chosen, the <strong>ECL</strong> Application Key does not<br />
contain any special settings.<br />
Choose ‘Start copying’ and confirm with 'Yes'.<br />
52 DEN-SMT/DK VI.LG.U2.02 <strong>Danfoss</strong> District Energy