ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Installation</strong> <strong>Guide</strong> <strong>ECL</strong> <strong>Comfort</strong> <strong>210</strong> / <strong>310</strong>, application <strong>A275</strong> / <strong>A375</strong><br />
Frost pr. T (frost protection temperature) 12093<br />
Circuit Setting range Factory setting<br />
2 5 ... 40 °C 10 °C<br />
Set the desired flow temperature to protect the DHW system against frost.<br />
5 ... 40: Desired frost protection temperature.<br />
Ext. input (external override), <strong>ECL</strong> <strong>210</strong> 12141<br />
Circuit Setting range Factory setting<br />
2 OFF / S1 ... S8 OFF<br />
Choose the input for 'Ext. input' (external override). By means of a switch the<br />
controller can be overridden to <strong>Comfort</strong> or Saving mode.<br />
OFF: No inputs have been selected for external override.<br />
S1 ... S8: Input selected for external override.<br />
If S1...S6 is chosen as override input, the override switch must have<br />
gold-plated contacts.<br />
If S7 or S8 is chosen as override input, the override switch can be a<br />
standard contact.<br />
See the drawing for a connection example of an override switch<br />
to input S8.<br />
Choose only an unused input for override. If an already used input is<br />
applied for override, the functionality of this input is also neglected.<br />
See also ‘Ext. mode’.<br />
142 DEN-SMT/DK VI.GU.L1.02 <strong>Danfoss</strong> District Energy