ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...

More documents

Recommendations

Info

Installation Guide ECL Comfort 210 / 310, application A275 / A375 8.2 Time & Date It is only necessary to set the correct date and time in connection with the first use of the ECL Comfort controller or after a power break of more than 72 hours. The controller has a 24 hour clock. Aut. daylight (Daylight saving time changeover) YES: The controller’s built-in clock automatically changes + / - one hour on the standardized days for daylight saving time changeover for Central Europe. NO: You change manually between summer and winter time by setting the clock backward or forward. When controllers are connected as slaves in a master / slave system (via ECL 485 communication bus), they will receive ‘Time & Date’ from the master. 156 DEN-SMT/DK VI.GU.L1.02 Danfoss District Energy
Installation Guide ECL Comfort 210 / 310, application A275 / A375 8.3 Holiday This section describes the function in general for the ECL Comfort 210 / 310 series. The shown displays are typical and not application related. They might differ from the displays in your application. There is a holiday program for each circuit and a holiday program for the common controller. Each holiday program contains one or more schedules. Each schedule can be set to a start date and an end date. The set period starts on the start date at 00.00 and stops on the end date at 00.00. Selectable modes are Comfort, Saving, Frost protection or Comfort 7-23 (before 7 and after 23, the mode is scheduled). How to set your holiday schedule: Action: Purpose: Examples: Choose ‘MENU’ Confirm Choose the circuit selector at the top right corner in the display Confirm Choose a circuit or 'Common controller settings' Heating DHW Common controller settings Confirm Go to ‘Holiday’ Confirm Choose a schedule Confirm Confirm choice of mode selector Choose mode . Comfort · Comfort 7–23 7-23 . Saving · Frost protection Confirm Enter the start time first and then the end time Confirm Go to ‘Menu’ Confirm Choose ‘Yes’ or ‘No’ in ‘Save’. Choose the next schedule, if required The holiday program in the ‘Common controller settings’ is valid for all circuits. The holiday program can also be set individually in the heating or DHW circuits. The end date must be at least be one day later than the start date. Danfoss District Energy VI.GU.L1.02 DEN-SMT/DK 157
Page 1 and 2:
Installation Guide ECL Comfort 210
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106: Installation Guide ECL Comfort 210
Page 155: Installation Guide ECL Comfort 210
Page 175: Installation Guide ECL Comfort 210
show all

ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?