INSTRUCTION MANUAL - Scorpio

GOAL of EXAMPLE: STEPS: INPUTS:
Set up aileron triple rates on SWITCH Open D/R,EXP function. for 1 second.
C
to D/R,EXP.
aerobatics) and exponential settings of Choose the channel to change
(Ex:
aileron is already selected)
to desired channel.
ACRO model.
to SW. to SwC.
NOTE: This normal rate has no Confirm switch is in desired position
exponential so it has a very linear,
normal feel. This slow roll rate has
to D/R.
C to up position.
positive exponential (the opposite of
what most people normally use), which
AILERON STICK.
AILERON STICK.
Move
SWITCH to 2nd rate position and C to center position.
feel the same around center in the set this particular rate.
normal and low rates, but still gives a
AILERON STICK.
AILERON STICK.
The 3D rate (extreme aerobatics) has a C to down position.
very high distance of travel nearly twice
that of the normal rate. Therefore, using
a very high negative exponential setting
AILERON STICK.
AILERON STICK.
softens how the servos respond around EXP.
to EXP.
C to up position.
for a more comfortable feel.
EXP reads 0.
C to down position.
AILERON STICK.
AILERON STICK.
switch. To do so, simply set up rates
for all 3 controls and assign all 3 to the
C to center position.
Close.
Where next?
Set up TRAINER functions: see p. 44.
Adjust the sensitivity of the trims: see p. 45.
Set up twin aileron servos: see p. 52.
Set up twin elevator servos: see p. 54.
41