INSTRUCTION MANUAL - Scorpio

Where next? Set up THROTTLE DELAY
Adjust throttle and Ch8 END POINTs: see p. 36.
Set up programmable mixes, for example, AILERON-to-RUDDER: see p. 65.
Throttle delay function THR-DELAY (ACRO):
The THR-DELAY function is used to slow the response of the throttle servo to
simulate the slow response of a turbine engine. A 40% delay setting corresponds
100%
DELAYS, p. 84.
THR), throttle into an auxiliary channel such as 8, and then using
GOAL of EXAMPLE: STEPS: INPUTS:
Activate THR-DELAYOpen
the THR-DELAY function. for 1 second.
Slow the servo response by one second.
to THR-DELAY.
Activate the function. to MIX. to ACT.
Adjust the RATE to match the desired
servo speed. (Ex: 40%.)
Close menu.
to RATE. to 40%.
Where next? Set up THROTTLE-NEEDLE mixing: see p. 62.
END POINT: see p. 36.
Adjust throttle exponential (D/R,EXP): see p. 39.
Set up AILEVATOR: see p. 54.
Set up programmable mixes, for example, RUDDER-AILERON: see p. 65.
63