INSTRUCTION MANUAL - Scorpio

Aircraft tail types (ACRO):
There are 4 basic tail types in aircraft models:
AILVATOR p. 54.
ELEVON. p. 53.
V-TAIL. Model uses 2 surfaces, at an angle, together to create yaw and pitch control. see V-TAIL. p. 55.
AILEVATOR, V-TAIL, and ELEVON) can be used at a time. The radio provides a
OTHER WING
MIXING "ON" will display.
Using ELEVON(ACRO
functions, using two servos, one on each elevon. The aileron/elevator responses of each servo can be adjusted
Adjustability:
travel.
NOTE: If ELEVON is active, you cannot activate FLAPERON, AILE-DIFF, or AILEVATOR. An error message OTHER WING MIXING
"ON" displays and you must deactivate the last function to activate ELEVON.
the AILERON and ELEVATOR STICKS are moved at the same time the controls may bind or run out of travel.
(
GOAL of EXAMPLE: STEPS: INPUTS:
Activate ELEVON.
Open the ELEVON function. for 1 second.
Adjust aileron down travel to 90% of up
travel, creating aileron differential.
to ELEVON. *
Activate the function. to MIX. to ACT.
Optional: adjust the up/down travel to AIL1. AILERON
STICK.
(Ex: down to 90%
to 90%.
Optional: adjust the elevator travel of
to 98%, left to 105%
Close menu.
53
to AIL2. AILERON
STICK.
to 90%.
to ELE2. to 98
to ELE1. to 105
Where next? SUB-TRIMs: see p. 46 and END POINTs: see p. 36.
Set up dual/triple rates and exponential(D/R,EXP): see p. 39.