INSTRUCTION MANUAL - Scorpio
INSTRUCTION MANUAL - Scorpio
INSTRUCTION MANUAL - Scorpio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Using FLAPERON (ACRO):<br />
The FLAPERON mixing function uses one servo on each of the two ailerons,<br />
<br />
raise/lower simultaneously. Of course, aileron function (moving in opposite<br />
directions) is also performed.<br />
Once FLAPERONELEVATOR-FLAP mixing), the radio commands both<br />
FLAPERON. A trimming<br />
feature is also available (see FLAP-TRIM<br />
END POINT and SUB-TRIM both still adjust each servo individually.<br />
Adjustability:<br />
<br />
<br />
<br />
<br />
FLAP-TRIM<br />
<br />
AIRBRAKE<br />
ELEVATOR-FLAPFLAP-TRIM is activated.<br />
GOAL of EXAMPLE: STEPS: INPUTS:<br />
Activate twin aileron servos, FLAPERON. Open the FLAPERON function. for 1 second.<br />
<br />
to FLAPERON.<br />
travel (aileron differential) within the<br />
FLAPERON programming. (Decrease right<br />
<br />
<br />
<br />
of aileron travel available.<br />
*<br />
Activate the function. to MIX. to ACT.<br />
Optional: adjust the up/down travel to AIL1.<br />
STICK.<br />
<br />
to 90%.<br />
AILERON<br />
to AIL2.<br />
STICK.<br />
AILERON<br />
<br />
to 90%.<br />
to FLP2. to +50<br />
<br />
travel to 50%<br />
Close menu.<br />
to FLP1. to -50<br />
Where next? Set FLAP-TRIM: see p. 51.<br />
Set up AIRBRAKE mix: see p. 61.<br />
<br />
* If you receive an error message that OTHER WING MIXING "ON", you must deactivate AIL-DIFF or ELEVON.<br />
50