INSTRUCTION MANUAL - Scorpio

THROTTLE-NEEDLE mixing (ACRO/HELI):
(ACRO)
THROTTLE-NEEDLE
THROTTLE STICK inputs for perfect engine tuning at all throttle settings. This function is particularly popular with
Adjustability:
AILEVATOR.
ACC) function (ACRO only) helps the engine compensate for sudden, large amounts of throttle input by
on rapid throttle input.
HELIMIX
>NOR
(ID1/2). Note that you can edit the mix for a different condition without being in that condition, to allow editing without
the > and not the one in parentheses.
GOAL of EXAMPLE: STEPS: INPUTS:
Activate THROTTLE-NEEDLE mixing. Open the THROTTLE-NEEDLE function. for 1 second.
Adjust the points as follows to resolve
a slight lean midrange problem:
to THROTTLE-NEEDLE.
Activate the function. to MIX. to ACT.
1: 40%
2: 45%
3: 65%
4: 55%
5: 40%
HELI only. Select the condition to edit.
Adjust the travels as needed to match
to each of the 5 points, then adjusting
the percentage at that point until the
engine is properly tuned.
to CND. to NOR or (I12/ID3]
ACROTHR Stick
HELIJOG KEY
to P-1. to 40%.
to P-2. to 45%.
ACRO
ACC
HELI only: set curves for other
conditions.
Close menu.
62
(HELI)
to ACC.
to P-3. to 65%.
to P-4. to 55%.
to P-5. to 40%.
as needed.
to condition name.
to next condition to edit.
Repeat above steps as needed.