Vision and Studio Vision Pro Version 4.1 Manual ... - House of Synth

CHAPTER 5: Acadia: Recording Audio
• High Resolution: This display
option allows Vision to display the
actual texture of waveforms. This is
desirable when you’re editing and
need to clearly see all peaks and valleys,
but it takes the longest amount
of time to recalculate and draw.
To record a stereo track:
In the Record Monitor Window, click
the Link Pairs option to check it.
For more information, see
Chapter 30: The Audio Menu in your
Audio Reference Manual.
NOTE: Remember, if you want to turn
audio recording off so Vision records only
MIDI, disable the Record Enable Indicator
in the Record Monitor Window, or simply
close the window. You can see if audio
recording is enabled by looking for the little
digital audio waveform in the Record Mode
pop-up.
ADVANCED RECORDING
TECHNIQUES
The following sections discuss other
audio recording techniques for Vision.
Stereo Recording
This section discusses how to set up
Vision to record stereo audio events using
the Acadia audio system.
Vision automatically switches the mono
hardware inputs to a stereo input pair
(see Figure 5.3).
Figure 5.3: Link Pairs enabled
In the Record Source pop-up, make
sure you have the desired input pair
selected.
Figure 5.4: Choosing a hardware input pair
Vision & Studio Vision Pro — Version 4.1 Manual Supplement 31