Vision and Studio Vision Pro Version 4.1 Manual ... - House of Synth

More documents

Recommendations

Info

PART 3: The Acadia Audio System • High Shelf boosts or reduces all frequencies above the specified cutoff frequency. The Frequency fader for this EQ type determines the cutoff frequency, above which all frequencies are attenuated with the Gain fader. • High Cut uses a low pass filter, which eliminates frequencies above the specified cutoff frequency. IMPORTANT: An audio channel’s Phase status (on or off) is not saved as part of an EQ template. EQ templates (along with plug-in programs and banks) are stored in the Vision Effects Templates file, which must reside in the same folder as the Vision application. Template Pop-up This EQ type has just one fader (labeled Frequency) controlling the cutoff frequency, above which frequencies are removed. When using High Cut, there is no accompanying Gain fader displayed in the EQ area of the Console Window. SAVING AND RECALLING EQ SETTINGS In Vision, any configuration of EQ settings can be saved and recalled as a template. This lets you save your favorite EQ settings for a wide range of applications (male vocals, 6-string guitar, kick drum, etc.). EQ settings can also be copied and pasted between audio channels. Figure 9.4: EQ Template pop-up Click on Template pop-up to select from a list of EQ templates. EQ templates are recalled from the Template pop-up in the EQ Window, see Figure 9.4. Simply click on the pop-up and choose from the list of EQ templates stored in the Vision Effects Templates file. Choosing a template automatically reconfigures the EQ Window for the displayed audio channel. 70 Opcode Systems, Inc.
CHAPTER 9: Acadia: EQ Window Template Functions Pop-up The Template Functions pop-up contains commands for saving, copying, and pasting EQ settings. Figure 9.5: Template Functions pop-up for EQ Following is a description of the commands found in the EQ Template Functions pop-up: • Save Settings: Saves the current EQ settings as a template. If the template already exists, this command overwrites it with the currently displayed EQ settings. • Save Settings As: Saves the current EQ settings to a new template. With this command you are prompted to enter a name for the new EQ template. • Delete Template: Deletes the currently selected EQ template. • Load From: Loads a set of EQ templates from a Vision Effects Templates file that is not current. The loaded templates are merged with the current set. • Copy Settings: Copies the current EQ settings to the Clipboard, which is handy for pasting EQ settings to another audio channel. • Paste Settings: Pastes the EQ settings from the Clipboard to the current EQ Window for the displayed audio channel. • Save as Default: Saves as default the current EQ settings. Then, each time a new file is created in Vision, audio channels will use those settings by default. Vision & Studio Vision Pro — Version 4.1 Manual Supplement 71
Page 1 and 2:
Vision and Studio Vision Pro Versio
Page 3 and 4:
TABLE OF CONTENTS PART ONE: Introdu
Page 5 and 6:
Table of Contents CHAPTER 9: Acadia
Page 7 and 8:
Introduction 1 2 3 Vision & Studio
Page 9 and 10:
CHAPTER 1: Introduction This 4.1 Ma
Page 11 and 12:
Summary of 4.1 Enhancements 1 2 3 V
Page 13 and 14:
CHAPTER 2: Enhancements in 4.1 This
Page 15 and 16:
CHAPTER 2: Enhancements in 4.1 TDM
Page 17 and 18:
CHAPTER 2: Enhancements in 4.1 AUDI
Page 19 and 20:
The Acadia Audio System 1 2 3 Visio
Page 21 and 22:
CHAPTER 3: Acadia: Hardware Setup T
Page 23 and 24:
CHAPTER 3: Acadia: Hardware Setup A
Page 25 and 26: CHAPTER 3: Acadia: Hardware Setup N
Page 27 and 28: CHAPTER 4: Acadia: Record Monitor W
Page 29 and 30: CHAPTER 4: Acadia: Record Monitor W
Page 31 and 32: CHAPTER 5: Acadia: Recording Audio
Page 41 and 42: CHAPTER 6: Acadia: Audio Instrument
Page 51 and 52: CHAPTER 7: Acadia: Audio Channels i
Page 67 and 68: CHAPTER 8: Acadia: Plug-In Edit Win
Page 73 and 74: CHAPTER 9: Acadia: EQ Window EDITIN
Page 75: CHAPTER 9: Acadia: EQ Window EQ PAN
Page 79 and 80: CHAPTER 10: Acadia: Bussing, Routin
Page 87 and 88: CHAPTER 11: Acadia: Optimizing for
show all

Vision and Studio Vision Pro Version 4.1 Manual ... - House of Synth

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?