ALLEN BRADLEY 1747-L551 PLC Processor

I–6
Index
keyswitch positions for the SLC 5/03 and
SLC 5/04 processors
PROG, 5-15
REM, 5-16
RUN, 5-15
L
line voltage variations, excessive, 2-23
line voltage, power supply specification,
2-11
link coupler
mounting dimensions, 4-5
powering, A-14
lithium batteries
1747-BA, 2-10
Code of Federal Regulations, 49 CFR
173.22a, 9-2
disposal of, 9-3
DOT-E7052 provision, 9-2
installing on SLC 5/01 or SLC 5/02
processors, 9-4
installing on SLC 5/03 and higher
processors, 9-5
shipping when depleted, 9-2
storing and handling, 9-1
transportation, 9-2
local I/O capacity, processor specification,
2-9
M
machine motion, preventing, 8-2
maintenance, preventive, 3-12
manuals, related, P-3
Master Control Relay, 3-7
master devices, DF1 half-duplex protocol,
B-5
maximum inrush current, power supply
specification, 2-11
memory back-up for the 1747-L511, 2-10
memory back-up options, processor
specification, 2-9
memory module, for SLC 5/03 and higher
processors, 2-20
memory modules
for SLC 5/01 and 5/02 processors, 2-18
for SLC 5/03 and higher processors,
2-20
installation, 6-3
minimum watts, defined, F-1
modems, for RS-232, B-7
module release, 1-5
modules, installation, 6-2
motor starters (bulletin 509), surge
suppressors, 2-25
motor starters (bulletin 709), surge
suppressors, 2-25
mounting dimensions
10-slot chassis, 4-3
13-slot chassis, 4-4
4-slot chassis, 4-1
7-slot chassis, 4-2
AIC+ Advanced Interface Converter, 4-6
Data Table Access Module, 4-5
DTAM Micro, 4-5
DTAM Plus, 4-5
link coupler, 4-5
Mounting Modular Hardware Style Units,
4-1
Mounting Your SLC 500 Control System,
4-1
10-slot chassis, 4-1
13-slot chassis, 4-1
4-slot chassis, 4-1
7-slot chassis, 4-1
AIC+ Advanced Interface Converter, 4-1
Data Terminal Access Module (DTAM),
4-1
DTAM Micro Operator Interface, 4-1
DTAM Plus Operator Interface, 4-1
link coupler, 4-1
MSG instruction, B-4
N
National Fire Protection Association
(NFPA), 3-1
noise generators, 2-23
noise immunity, processor specification,
2-9
noise, excessive, 2-23
O
operating cycle, SLC 500 controller, 2-3
operating system upgrade, 6-4
operator interface, selecting
DTAM, 2-16
DTAM Micro, 2-17
DTAM Plus, 2-16
HHT, 2-15
IBM compatible computer, 2-15
PanelView 550, 2-17
Publication 1747-6.2