BreezeMAX Si 2000 CPE User Manual - Alvarion
BreezeMAX Si 2000 CPE User Manual - Alvarion
BreezeMAX Si 2000 CPE User Manual - Alvarion
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 7 - VoIP Settings<br />
Phone Setting<br />
• Dial Tone Timeout – The length of time a dial tone is heard on a connected<br />
phone. (Range: 1-300 seconds; Default: 16 seconds)<br />
• Inter Digit Timeout – The maximum time delay allowed between each dialed<br />
digit. When the time is exceeded, a call is made using the dialed digits. (Range:<br />
1-300 seconds; Default: 2 seconds)<br />
• Line Echo Cancellation – Sets the delay time for voice echo cancellation. A<br />
voice echo can be created on some two-wire phone loops, which becomes<br />
increasingly louder and annoying when there is a long delay. If voice echo is a<br />
problem during a call, you can adjust this parameter to try and reduce or<br />
remove it. (Default: Enabled)<br />
• VAD/CNG – Voice Activity Detection/Comfort Noise Generator. VAD enables<br />
the detection of periods of silence in the audio stream so that it is not<br />
transmitted over the network. CNG then inserts artificial noise during silent<br />
intervals in the audio stream. (Default: Enabled)<br />
<strong>BreezeMAX</strong> <strong>Si</strong> <strong>2000</strong> <strong>CPE</strong> 99 <strong>User</strong> <strong>Manual</strong>
Change language