BreezeMAX Si 2000 CPE User Manual - Alvarion

Chapter 3 - Initial Configuration
Introduction
When configuring the unit through the Basic Setup, proceed through the following
steps:
1 For first-time setup, place the CD supplied by your WiMAX operator in the CD
drive of the PC. Navigate to the CD’s location using the “Browse” button.
2 Click Next; this enables the Basic Setup to copy the WiMAX operator’s settings
to the gateway.
Figure 3-3: Basic Setup - CD Directory
3 WiMAX Login – The Account Setting page sets the user name and password
required to gain access to the WiMAX network.
Figure 3-4: Basic Setup - WiMAX Login
Username – The user name required for network authentication, as supplied
by the WiMAX service provider. (Default: pseudo@realm)
Password – The user password required for network authentication, as
supplied by the WiMAX service operator. (Range: 1-32 characters; Default:
hello)
4 Apply Settings – When you click "Apply" the settings on the operator-supplied
CD are copied to the gateway, then the unit reboots and attempts to connect to
the specified WiMAX network.
BreezeMAX Si 2000 CPE 34 User Manual