BreezeMAX Si 2000 CPE User Manual - Alvarion
BreezeMAX Si 2000 CPE User Manual - Alvarion
BreezeMAX Si 2000 CPE User Manual - Alvarion
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5 - Gateway Configuration<br />
WAN Settings<br />
5.3.4 PPPoE Settings<br />
If your service provider supports Point-to-Point Protocol over Ethernet (PPPoE) for<br />
your Internet connection, configure the settings described below.<br />
Figure 5-10: PPPoE Settings<br />
• PPPoE Network Server – The IP address of the PPPoE server, as specified by<br />
the service provider.<br />
• Keep Alive – This option enables the unit to check periodically that the PPPoE<br />
connection is still operating. If the connection is found to be lost, the unit<br />
automatically attempts to reconnect to the service provider. (Default: Enabled)<br />
• Keep Alive Time – The time period the unit waits before checking that the<br />
PPPoE connection is still operating. This parameter only applies when Keep<br />
Alive is enabled. (Default: 60 seconds; Range: 10-180 seconds)<br />
<strong>BreezeMAX</strong> <strong>Si</strong> <strong>2000</strong> <strong>CPE</strong> 62 <strong>User</strong> <strong>Manual</strong>
Change language