BreezeMAX Si 2000 CPE User Manual - Alvarion
BreezeMAX Si 2000 CPE User Manual - Alvarion
BreezeMAX Si 2000 CPE User Manual - Alvarion
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4 - System Settings<br />
TR069 Settings<br />
4.8 TR069 Settings<br />
The Technical Report 069 (TR069) protocol defines a specification for remote<br />
management of <strong>CPE</strong> devices. The protocol uses HTTP for two-way communication<br />
between the <strong>CPE</strong> device and an Auto Configuration Server (ACS), allowing service<br />
providers to provide <strong>CPE</strong> configuration, software upgrades, and other service<br />
functions for end-users.<br />
The TR069 Settings page allows you to set up the basic TR069 connection<br />
parameters.<br />
NOTE<br />
The TR069 Settings page is only available in Operator mode.<br />
Figure 4-12: TR069 Settings<br />
• Enable Periodic Report – Enables the sending of TR069 reports from the <strong>CPE</strong><br />
to the ACS server. (Default: Enabled)<br />
• Periodic Report Interval – Sets the time interval for sending TR069 reports to<br />
the ACS server. (Range: 0-65535 seconds; Default: 86400 seconds)<br />
• <strong>User</strong> Name – The <strong>CPE</strong> user name required for authentication during session<br />
set up with the ACS server. (Default: admin)<br />
• Password – The <strong>CPE</strong> password required for authentication during session set<br />
up with the ACS server. (Default: admin)<br />
<strong>BreezeMAX</strong> <strong>Si</strong> <strong>2000</strong> <strong>CPE</strong> 50 <strong>User</strong> <strong>Manual</strong>