UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

OW5000 Configuration 2-93
Step 8
Choose the Confidentiality Status from the drop-down list. (Only
available for the US market).
Pilot Number, Dterm Password, and Confidentiality Status are not used unless the
OW5000 Applications released in the US market are used.
NOTE
Step 9
Do one of the following:
—Click Apply to add the contact method and continue with the
configuration.
—Click Done to save the information and close the dialog box.
—Click Cancel to exit without saving the information.
Address Information
This is displayed only when the United States is selected as the Sales
Region or if an OW5000 Application which released in US market is
installed.
Step 1
To add an address, select the Addresses tab. If no Addresses have
been configured, click Add New Address. An Address Information
dialog box displays (Figure 2-104).
Figure 2-104 Address Information dialog box
I
Step 2
Select the Address Type from the drop-down list.
Fields which must be completed are designated with an asterisk (*).
NOTE
Step 3
Enter/select information in the following fields:
—Country/Region
—Street
—City
—Zip/Postal Code
UCE Application Platform (UNIVERGE OW5000) Configuration Guide