UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

2-56 OW5000 Configuration
Figure 2-63 Redirect Configuration—Add New dialog box
Step 2
Step 3
Step 4
Select the PBX from the drop-down list.
Select the Redirect Number from the drop-down list.
Click Done to accept the changes or Cancel to exit without saving the
changes.
PBX Settings
Selecting PBX Settings from the ICA General Settings dialog box
(Figure 2-61) displays an ICA PBX Settings dialog box (Figure 2-64).
Figure 2-64 ICA PBX Settings dialog box
Values in gray are the read-only values assigned at the time the PBX
was configured for use with the OW5000 Platform. Changes to these
values can only be made by modifying the global PBX configuration
under OW5000 Platform. Such changes will affect every application
using that PBX. To specifically modify the PBX settings used only by ICA,
use the following steps.
UCE Application Platform (UNIVERGE OW5000) Configuration Guide