UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

2-40 OW5000 Configuration
Figure 2-44 Add Reserved Number dialog box
Step 2
Enter the number to reserve in the Number field.
Enter a private number for an IP centrex environment.
NOTE
Step 3
Step 4
Step 5
Step 6
Select the Tenant from the drop-down list.
Select one of the Reserved Type options from the drop-down list.
Dummy DTerm Number - it is only necessary to allocate Dummy
Dterms if you are so instructed by an application installation. This is not
required unless United States is selected as the Sales Region.
Monitored Numbers... to enter one or more monitored numbers (AMNO
assigned on the NEAX 2400) that can serve as a shared pool for
applications requiring monitored numbers. It is only necessary to allocate
Monitored Numbers if you will be running an application such as the
UNIVERGE UA5200, which requires such numbers in its configuration.
Monitored Numbers are mandatory for LCS/OCS Integration.
Choose the Application from the drop-down list.
OW5000API must be assigned for LCS/OCS integration. The ACD,
Incoming Call Assistant, Location Status and the Oai Server are not used
if only the OW5000 platform is used.
Do one of the following:
—Click Apply to save the Reserved number without exiting the dialog
box. Click Apply & Add New to save the Reserved Number; the
Extension is increased automatically.
—Click Done to save the Reserved number and exit the dialog box.
—Click Cancel to exit the dialog box without saving the Reserved
Number.
Step 7 To Edit existing numbers, click the Pencil icon.
UCE Application Platform (UNIVERGE OW5000) Configuration Guide