UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

2-68 OW5000 Configuration
TEST TRANSLATION is used to check the regular expression of the
rule, but the OW5000 system determines the rule not only this regular
expression.
TEST ANI TRANSLATION is used to check how the OW5000 converts
this input phone number. OW5000 uses several internal logics to
determine the translation results so this test field allows the user to see
how the OW5000 works. To test TEST ANI TRANSLATION, assign a
Country Code for the Rule and Location in PBX Management page.
TEST TRANSLATION
Step 1
Enter the test phone number in Test Dialed Number and then click
Check Rule.
If there is a matching normalization rule in the system, the normalization
rule and the translated result displays on this page.
If there is no matching rule in the system, Translated number field is a
blank. The Rule is checked from the top normalization rule so if multiple
rules are matched for the test value, the highest priority rule displays.
TEST ANI TRANSLATION
Step 1
Enter the test phone in the Test ANI field, select the destination PBX
from the drop-down list, and then click Check Rule.
If there is a matching normalization rule in the system, the rule and
translated result displays in the Translated number field.
If there is no matching rule in the system, the Translated number filed is
a blank. Rule is checked from the top normalization rule so if multiple
rules are matched for test value, highest priority rule is displayed.
UCE Application Platform (UNIVERGE OW5000) Configuration Guide