UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

OW5000 Configuration 2-13
• If the terminal does not belong to a group, the terminal accepts
reference from all the other terminals.
• In federation environment, all OW5000 systems should have the
following settings. If not, Access Control may not work correctly.
• Use same SIPUA group name
• Access Control between SIPUA group should be the same
• Do no use PBX Access Control
SIPUA Group
Figure 2-15 Access Control dialog box
Step 1
To add a new SIPUA Group, click Add New Group. A SIPUA
Group—Add New dialog box displays (Figure 2-16).
Figure 2-16 SIPUA Group—Add New dialog box
Step 2
Step 3
Step 4
Type the Group Name in the text box.
Click the checkbox to select Deny as Default if you do not want to
display the presence of the user who belongs to this group.
Click Apply to accept the new group or Cancel to exit without adding a
new group.
Step 5 To edit or delete a SIPUA Group, click the Pencil icon or the
Trashcan icon. A delete confirmation dialog box displays to confirm
deletion.
UCE Application Platform (UNIVERGE OW5000) Configuration Guide