UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

OW5000 Configuration 2-21
Note: Is Monitored must be checked in the following case.
-Use presence for non SIP terminal
-Get history via OW5000 API (Call Control), OW5000 API (Call Notification), and OW5000
(Information API). Refer to the documentation for each OW5000 related application.
A subline must be configured only when the call log for subline is required.
NOTE
Editing or Deleting Extensions
Step 1 To edit an extension, click the Pencil icon next to the desired
extension (Figure 2-21).
Step 2
After making the necessary changes, do one of the following:
—Click Apply to save the new extension.
—Click Apply & Add New to save the new extension and keep adding
another extension. (PBX, Phone Type, Tenant, and the SIP Access
Server configuration, used in the previous data, are continuously
displayed.)
—Click Done to save the new extension and return to the list page.
—Click Cancel to discard all changes and return to the list page.
Step 3 To Delete an extension, click the Trashcan icon next to the desired
extension.
Range Delete
Use the following steps to delete a range of extensions.
Step 1
Click Range Delete from the Extension Management dialog box
(Figure 2-21).
Figure 2-23 Range Delete dialog box
Step 2
Step 3
Select the PBX and Tenant number from the drop-down list.
Enter the Starting Extension and Ending Extension in the text boxes.
UCE Application Platform (UNIVERGE OW5000) Configuration Guide