UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

2-6 OW5000 Configuration
Figure 2-7 OW5000 Admin Login screen
Step 5
Enter your login ID in the Login ID field.
The login ID is admin.
NOTE
Step 6
Enter your password in the Password field.
The password for admin is admin. This password can be changed. Refer to “User
Management Configuration” on page 2-100.
NOTE
Step 7
Click Login.
REFERENCE
If an error message describing a problem connecting to the OW5000 Administrator
Service displays, refer to “Verifying the OW5000 Administrator Status” on page 2-2, to
confirm that the proper services are running.
If there is no activity for 15 minutes (default), the Administrator login page displays
and re-login is required. After login, a pre-configured page displays.
NOTE
After the initial login, you are required to change your password to a strict
password (Figure 2-8).
UCE Application Platform (UNIVERGE OW5000) Configuration Guide