UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

OW5000 Configuration 2-51
Step 2
Step 3
Step 4
Enter the translation format in the Translation Pattern field. $1 must be
there in this filed. Refer to Appendix C for details on the Regular
Expression.
Enter the target access server in the IP Address field. This Access
Server belongs to a different OW5000 system so the Access Server
name is not available.
Enter the target access server port number in the Port field.
Example1:
Routing Rule: ^710([0-9*#]{5})@.+$
(SIPURI start from 710 and 5 digits (total 8 digits) before @ mark and
store that 5 digits as $1)
Translation Pattern: $1@sip.com
IP Address: 192.168.0.10
Port: 5060
Input SIPURI: 71012345@necinfrontia.com
Result:
12345@sip.com is sent to 192.168.0.10 port 5060 using TCP session.
Testing a Routing Rule
Clicking Test Routing Rule from the Access Server dialog box displays
an Access Server—Test Routing Rule dialog box (Figure 2-58). The Test
Routing Rule button is displayed when more than one Routing Rule is
assigned.
Figure 2-58 Access Server—Test Routing Rule dialog box
This page provides test functionality for a routing rule.
Step 1
Enter the test SIPURI in the Test Routing Rule field and then click Test.
If a matching routing rule is found in the system, the routing rule and
target information displays on this page.
If a matching rule is not found in the system, the Routing Rule Info field is
blank and an error box displays. The rule is checked from the top routing
rule so if multiple rules are matched for the test value, the highest priority
rule displays.
UCE Application Platform (UNIVERGE OW5000) Configuration Guide