UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

2-32 OW5000 Configuration
Figure 2-33 Delete PBX Configuration Confirmation dialog box
Step 2
Do one of the following:
—Click OK to delete the configuration.
—Click Cancel to close the dialog box without deleting the PBX
configuration.
Locations
Locations must be configured for each PBX if outbound dialing and
inbound parsing of numbers is to work correctly.
Location is used only for OW5000 API (Call Control) and LCS/OCS Integration.
NOTE
Adding Locations
Use the following steps to add a Location for a given PBX.
Step 1
Click the Locations tab to display a Locations Configuration dialog box
(Figure 2-34).
Figure 2-34 Locations Configuration dialog box
Step 2
Click Add New Location. An Add New Location dialog box displays
(Figure 2-35).
UCE Application Platform (UNIVERGE OW5000) Configuration Guide