UNIVERGE OW5000 Configuration Guide - NEC Corporation of ...

Log Viewer 4-3
# Features Local Remote
17
18
19
Print out event information
(Real-time Query)
Save search result
(Real-time Query)
Bookmark
(Real-time Query)
Log Server OAI.LOG Log Server OAI.LOG
X - - -
X - - -
X - - -
20 Change Log Level X - X -
21 Maintenance Log File X - X
22 Change Query Mode X - X -
NOTE
Multiple Log Viewers can be used on the same server. However, it might be a
problem when the Log Viewer configuration is changed. Therefore, do not change
any configurations while multiple Log Viewers are being used.
Starting Log Viewer
Log Viewer connects to the OW5000 Log Server (OAI Monitor) or the log
file which was created by the OW5000 Log Server.
Use the following steps to start Log Viewer:
Step 1 From the desktop, click the Start button, and then select All Programs >
NEC OW5000 > Runtime Platform > Log Viewer. A Connect to
OW5000 Log dialog box displays (Figure 4-1).
Figure 4-1 Connect to OW5000 Log dialog box
Step 2
In the Location field, type the name where the Log Server is to connect.
If this is a Local Server, type the OW5000 Platform computer name
where it connects to the OW5000 Log Server.
If this is a Remote Server, type the OW5000 Platform server IP Address
and port number (5690). For example, 127.0.0.1:5690. If the DNS is
available, the OW5000 Platform computer name is available even if it is
a remote server. You can also use the browse button (...) to select a log
UCE Application Platform (UNIVERGE OW5000) Configuration Guide