GL900 USER'S MANUAL - Graphtec

Settings and Measurement
3.5 X-Y Measurement Example
(Example 1) Measure the CH1 for X-axis and the CH2 for Y-axis.
Measurement examples when specifying CH1 for X-axis and CH2 for Y-axis are described below.
Only the X-Y channel 1 is displayed with orange line.
(1) Press the DISPLAY key three times to open the X-Y Display screen.
(2) Press the TIME/DIV key ( ) several times to make the line color of X-Y channel 1 to orange.
CHECKPOINT
Note that you can set the colors of the waveforms (colors of X-Y channels) displayed on the X-Y Display
screen, but not change those on the Y-T screen.
(3) Press the SPAN/TRACE/POSITION key three times to select the TRACE.
(4) Press the CH SELECT key to move the cursor to the X-Y channel 2.
3-49