GL900 USER'S MANUAL - Graphtec

More documents

Recommendations

Info

4 CHAPTER Specifications This chapter describes the basic specifications for the GL900. 4.1 Standard Specifications 4.2 Function Specifications 4.3 Accessory/Option Specifications 4.4 External Dimensions
Specifications 4.1 Standard Specifications Standard Specifications Item GL900-8 Description Number of analog channels Fixed to 8 channels Fixed to 4 channels External input/output Trigger input Logic input 4 channels or Pulse input 4 channels Alarm output PC inteface Ethernet (10BASE-T/100BASE-TX) USB (High Speed supported) provided as standard features Internal memory devices Internal RAM : Approx. 64 MB Internal flash memory : Approx. 256 MB USB memory slot (High Speed supported) provided as standard features Data backup function Setup condition: EEPROM; Clock: lithium secondary battery Clock accuracy Network Time Setting Off: ±0.002% (accurate within about 50 seconds per month) (23°C environment) Network Time Setting On: ±0.01% (accurate within about 8.6 seconds per day) (maximum error after synchronization) Operating environment 0 to 40°C, 5 to 85% RH (15 to 35°C when using batteries) Withstand voltage Between each input channel - terminal and ground terminal : 1 minute at 1000 Vp-p Between input channel - terminals : 1 minute at 1000 Vp-p Power supply AC adapter : 100 to 240 VAC, 50/60 Hz DC input : 8.5 to 24 VDC Batery pack (option) : 7.4 VDC (2200 mAh) 17Wh* 2 Power consumption GL900-8 GL900-4 Normal During battery recharge Normal During battery recharge • AC power consumption (when using AC adaptor provided as a standard accessory) • DC current consumption +24V +12V +8.5V When the LCD is on: 30VA When the screensaver is operating: 25VA Normal When the LCD is on: 0.62A When the screensaver is operating: 0.48A When the LCD is on: 1.16A When the screensaver is operating: 0.92A When the LCD is on: 1.82A When the screensaver is operating: 1.36A When the LCD is on: 42VA When the screensaver is operating: 37VA During battery recharge When the LCD is on: 1.0A When the screensaver is operating: 0.88A Recharging not possible Recharging not possible When the LCD is on: 23VA When the screensaver is operating: 18VA Normal When the LCD is on: 0.45A When the screensaver is operating: 0.33A When the LCD is on: 0.84A When the screensaver is operating: 0.6A When the LCD is on: 1.25A When the screensaver is operating: 0.85A * Normal status is when LCD brightness is set to MAX. External dimensions 232 x 150 x 80 mm Weight* 1 1.1 kg 1 kg Vibration-tested conditions Equivalent to automobile parts Type 1 Category A classification *1 Excluding the AC adapter and batteries *2 Two battery packs (B-517: option) are required for the GL900 to run on batteries. For details, see Section 2.9, "Using the Battery Pack (B-517: Option)". GL900-4 When the LCD is on: 40VA When the screensaver is operating: 35VA During battery recharge When the LCD is on: 0.84A When the screensaver is operating: 0.72A Recharging not possible Recharging not possible 4-2
Page 1 and 2:
GL900 USER’S MANUAL MANUAL NO. GL
Page 3 and 4:
Introduction (5) Do not use the GL9
Page 5 and 6:
Safety Precautions Safety Precautio
Page 7 and 8:
Safety Precautions Safety Precautio
Page 9 and 10:
Contents CONTENTS Introduction ....
Page 11 and 12:
Contents x
Page 13 and 14:
General Description 1.1 Overview Th
Page 15 and 16:
General Description CAUTION Do not
Page 17 and 18:
2 CHAPTER Checks and Preparation Th
Page 19 and 20:
Checks and Preparation 2.3 GL900 Pa
Page 21 and 22:
Checks and Preparation Connecting t
Page 23 and 24:
Checks and Preparation 2.6 Logic Al
Page 25 and 26:
Checks and Preparation 2.7 Attachin
Page 27 and 28:
Checks and Preparation LAN Connecti
Page 29 and 30:
Checks and Preparation Charging the
Page 31 and 32:
Checks and Preparation 2.11 Precaut
Page 33 and 34:
Checks and Preparation 2.13 Setting
Page 35 and 36:
Settings and Measurement 3.1 Window
Page 37 and 38:
Settings and Measurement 9. Digital
Page 39 and 40: Settings and Measurement 3.2 Key Op
Page 41 and 42: Settings and Measurement 4. MENU Op
Page 43 and 44: Settings and Measurement In USB Dr
Page 45 and 46: Settings and Measurement 12. CURSOR
Page 47 and 48: Settings and Measurement 3.3 Operat
Page 49 and 50: Settings and Measurement (4) Replay
Page 51 and 52: Settings and Measurement Switching
Page 53 and 54: Settings and Measurement (1)-4 EU (
Page 55 and 56: Settings and Measurement (1)-9 Slop
Page 57 and 58: Settings and Measurement CAUTION Wh
Page 59 and 60: Settings and Measurement (2)-5 File
Page 61 and 62: Settings and Measurement (3) TRIG S
Page 63 and 64: Settings and Measurement (3)-4 Pre-
Page 65 and 66: Settings and Measurement About Leve
Page 67 and 68: Settings and Measurement (4)-1 End-
Page 69 and 70: Settings and Measurement (5)-5 Temp
Page 71 and 72: Settings and Measurement (6)-1 F
Page 73 and 74: Settings and Measurement (6)-7 Next
Page 75 and 76: Settings and Measurement Use the ke
Page 77 and 78: Settings and Measurement (9) Data R
Page 79 and 80: Settings and Measurement (9)-8 Next
Page 81 and 82: Settings and Measurement Screen Ope
Page 83 and 84: Settings and Measurement (5) Press
Page 85 and 86: Settings and Measurement (6) Press
Page 87 and 88: Settings and Measurement 3. The fol
Page 89: Settings and Measurement • Downlo
Page 93 and 94: Specifications Input Unit Specifica
Page 95 and 96: Specifications External Input/Outpu
Page 97 and 98: Specifications Humidity Sensor B-53
Page 99 and 100: Specifications 4-channel equipment
Page 101 and 102: Index Level Operations ............
Page 103 and 104: Index I-4
Page 105: 503-10 Shinano-cho, Totsuka-ku, Yok
show all

GL900 USER'S MANUAL - Graphtec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?