You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Service - 138<br />
JT5 Operator’s <strong>Manual</strong><br />
50 Hour<br />
Change Drilling Fluid Pump Oil (Initial<br />
Service)<br />
Change fluid pump oil after first 50 hours and every<br />
750 hours thereafter. Drain at plug (2) and add EO<br />
at plug (1). Maintain fluid level at fill plug.<br />
Clean Drilling Fluid Pump Strainer<br />
Clean drilling fluid pump strainer after the first 50<br />
hours, then clean as needed.<br />
Check Radiator<br />
Check radiator for dirt, grass, and other foreign<br />
matter every 50 hours. Clean out with<br />
compressed air or spray wash if required. Be<br />
careful not to damage fins with high-pressure air<br />
or water. Check more often if operating in dusty or<br />
grassy conditions.<br />
CMW
Change language