You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
JT5 Operator’s <strong>Manual</strong> Specifications - 153<br />
Drilling Fluid System (Onboard) U.S. Metric<br />
Maximum drilling fluid flow 0-5 gpm 0-18.9 L/min<br />
Maximum drilling fluid pressure 750 psi 51.7 bar<br />
Fluid Capacities U.S. Metric<br />
Fuel tank 13 gal 49 L<br />
Hydraulic reservoir 8 gal 30 L<br />
Engine oil, including filter 4.2 qt 4 L<br />
Battery<br />
SAE reserve capacity rating 85 min, 12V, negative ground, SAE cold crank rating @ 0°F (-18°C), 525<br />
amps.<br />
Noise Levels<br />
Operator ear sound pressure level is 93 dBA sound pressure per ISO 6394<br />
Exterior sound power level is 103 dBA per ISO 6393<br />
Specifications are called out according to SAE recommended practices where indicated. Specifications are general and subject to<br />
change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options,<br />
delivered equipment may not necessarily match that shown.<br />
CMW
Change language