You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
JT5 Operator’s <strong>Manual</strong> Service - 147<br />
As Needed<br />
As Needed<br />
Location Task Notes<br />
DRILLING<br />
UNIT<br />
Change pipe lubricator TJC tube<br />
Check track tension and condition<br />
Adjust fan belt<br />
Replace saver sub<br />
Check fluid pump check valve<br />
Replace carriage slide bars<br />
Replace fuses<br />
TJC<br />
Drilling Unit<br />
Change Lubricator TJC Tube<br />
Check pipe lubricator TJC level and change tube as needed.<br />
To change tube<br />
1. Pull lock handle (3) back.<br />
2. Unscrew cartridge (2).<br />
3. Release handle and push tube (1) out.<br />
4. Pull handle lock.<br />
5. Remove caps and insert new tube of TJC.<br />
6. Screw cartridge in.<br />
7. Release handle.<br />
8. Unscrew cartridge 2-3 turns.<br />
9. Watch for grease to come out of weep hole.<br />
10. Screw cartridge back in when grease comes<br />
out of hole.<br />
NOTICE: Use only genuine <strong>Ditch</strong> <strong>Witch</strong> tool joint compound to maintain warranty. See<br />
“Recommended Lubricants/Service Key” on page 130 for more information.<br />
CMW