INfinity 510 Protocol Reference Guide - Sirit

Chapter 12 - Tag Namespace
tag.lock_id
This function locks a tag's id. The parameters supported by this function
are:
lock_type – Indicates the type of lock to apply to the tag's id.
tag_id (optional) – Indicates the id of the tag to apply the lock. If this
parameter is not specified, the first tag found in the field is locked.
pwd (optional) – Indicates the access password required to operate on
a locked tag (Gen 2 only).
antenna (optional) – Indicates the list of antennas on which the function
executes. If an antenna is not specified, all antennas will be tried until
the function succeeds or no more antennas are available.
The following example permanently locks the id of tag
0x306800095EFDDF80000987A5:
>>> tag.lock_id(tag_id=0x306800095EFDDF80000987A5,
lock_type=perma_locked)
ok
Type
Permissions
Parameters
function
guest=x,admin=x
lock_type (enum definitions.enum.tag.lock.types)
tag_id (array)
pwd (array)
antenna (list)
110 INfinity 510 Protocol Reference Guide