INfinity 510 Protocol Reference Guide - Sirit

Chapter 4 - Reader Behavior
The filter values and their meaning are presented in the following
table:
Type
Binary Value
All Others 000
Retail Consumer Trade Item 001
Standard Trade Item Grouping 010
Single Shipping/ Consumer Trade Item 011
Reserved 100
Reserved 101
Reserved 110
Reserved 111
SGTIN-96 tags with a filter value set to indicate a Single Shipping/
Consumer Trade Item would start with the bit pattern: 0011 0000 011.
NOTE
The mask and pattern
field length must
match for the filter to
work as expected.
To setup filter #1 on the reader for SGTIN-96 tags with a filter value
indicating a Single Shipping/ Consumer Trade Item use the commands:
> tag.filter.1.name = SGTIN-96 SSCT
ok
> tag.filter.1.inclusive = true
ok
> tag.filter.1.mask = 0xFFE0 (only look at first
11 bits)
ok
> tag.filter.1.pattern = 0x3060
ok
> tag.filter.1.enabled = true
ok
INfinity 510 Protocol Reference Guide 35