INfinity 510 Protocol Reference Guide - Sirit

Chapter 14 - Antennas Namespace
antennas..advanced.computed_conducted_power
This variable is the computed conducted power (in tenths of dB) on a port.
The following example shows the advanced method for specifying the
antenna data needed to have the reader set the conducted power for
antenna number 1. The last command in the example reads the reader
computed conducted power.
NOTE: The computed conducted power is based on the region/sub_region
and the value of 259 is only presented as an example. Your actual
computed conducted power may be different based on the readers
region/sub_region.
>>> antennas.1.conducted_power = 0
ok
>>> antennas.1.advanced.gain_units = dBdC
ok
>>> antennas.1.advanced.gain = 50
ok
>>> antennas.1.advanced.cable_loss = 15
ok
>>> antennas.1.advanced.attenuation = 75
ok
>>> antennas.1.advanced.computed_conducted_power
ok 259 = 1 to 4.
Type
var
Permissions
Data Type
int
Default 0
Min
Max
Units
ddB
guest=r,admin=r
154 INfinity 510 Protocol Reference Guide