INfinity 510 Protocol Reference Guide - Sirit

Chapter 15 - Modem Namespace
modem.protocol.supertag.control.tx_atten
This specifies the transmit attenuation applied during Supertag
transmissions. The value is in ddBm so a value of 200 would be an
attenuation of 20 dBm.
Type
Permissions
Data Type
var
guest=r,admin=rw
int
Default 0
Min 0
Max 300
modem.protocol.supertag.physical.max_demod_dist
This variable sets an upper limit on the average demodulator slicer error
before the receiver stops demodulating due to tag collision or excessive
noise. Decreasing this value reduces the likelihood of "ghost tags" due to
erroneous demodulation & CRC match, but may also decrease read range.
Increasing the value has the opposite effect.
Type
Permissions
Data Type
var
guest=-,admin=rw
int
Default 4000
Min 1000
Max 1000000
modem.protocol.supertag.physical.return_link_freq
This variable sets the return link frequency for tag to reader communication.
Type
Permissions
Data Type
Default
Enum
var
guest=r,admin=rw
enum
LF64
LF64 LF256
INfinity 510 Protocol Reference Guide 205